Filter
Top Products
64
The PC Software
System Prerequisites
The system prerequisites for the installation of the Eumex 504PC SE software on your
PC are as follows:
• IBM-compatible PC with a hard-disk and CD-ROM drive
• CPU speed of 233 MHz or faster
• Minimum of 64 MB RAM
• Microsoft Windows 98/Me/2000/XP*
• One free USB port or
serial interface (COM port) RS 232 (V.24).
* Windows 95/NT4 are also supported. However, there is no guarantee that the
complete range of functions will be available, as these operating systems do not
support USB. Connect PCs with these operating systems via the serial interface
(V.24). This interface must be equipped with a UART 16550 chip enabling a data
throughput rate of at least 115 kb/s. PCs built in or after 1996 generally have this
chip. Please refer to your PC manual or ask your dealer or the manufacturer of your
PC. In addition, the Eumex 504PC SE must already have been installed in accord-
ance with the diagram in the chapter entitled "Connecting Devices" on p. 10.
Important Note
Before you install the Eumex 504PC SE driver software, you must first remove any exist-
ing ISDN card and uninstall any existing CAPI drivers.