Filter
Top Products
79
Configuring the System
Emergency numbers (Notrufnummern)
You can set up three emergency numbers (preset are 110 and 112), which can
always be dialled from a telephone, independent of its external line access. You can
also use the emergency number memory location to save an area code (e.g. 030).
Telephones without external line access can thus be used to call numbers in this
area, while all other external calls remain blocked.
ECT (Call transfer) (Gesprächsweitergabe)
This ISDN feature enables two external calls to be connected in the exchange. If the
ISDN ECT service is available in the exchange, you can activate and deactivate the
function.
Automatic keypad signalling (Automatische Keypad-Signalisierung)
If your Eumex 504PC SE is installed as a secondary system behind another commu-
nications system, it may be necessary (depending on the type of primary system) to
change the signalling procedure of the Eumex 504PC SE from "Keypad" (the default
setting on delivery) to "Number." This deactivates the automatic switchover to keypad
triggered by pressing the star or hash keys. The star and hash keys can then also be
used as dialling digits. Please refer to the documentation of your primary system for
information on the signalling procedure required.
Number translation (Rufnummer Umsetzung)
You have probably entered MSNs in your CAPI applications (communications soft-
ware, e.g. Teledat RVS-COM) to enable external incoming calls to reach your fax soft-
ware or answerphone. To enable this for internal (free of charge) calls too, number
translation is required. Assign a CAPI application MSN an internal number (20 to 29)
under which the corresponding application can be reached by internal subscribers.
You can assign up to three numbers.