Filter
Top Products
86
CAPI Control
CAPI Control
The CAPI Control program provides you with comprehensive information about an
existing connection, and enables you to edit a number of CAPI settings.
Windows starts this program automatically, and you can invoke it via the taskbar.
For further information about each of the available tabs, click on the Help button.
You can, for example, set the currency (see
diagram).
Setting the charge factor in CAPI Control has
no affect on the setting in your Eumex 504PC
SE.
Note:The checkbox "Warnen, wenn Gerät
nicht gefunden wird" (Warn if device not
found) is only available if a serial interface
(COM port) has been selected.
Protection against undesired connections
Click on the "Sicherheit" (Security) tab.
When you have clicked on the "Neu" (New)
tab, you can enter a name for the connection
and a number which can be used for estab-
lishing this connection.
You can enter several numbers. Activate con-
nection monitoring by clicking on the corre-
sponding button. A tick appears there when
the function is active. In this way you ensure
that dial-up connections (and fax connec-
tions) started via the dial-up network entry can
be established only to the numbers contained
in this list.
Note:These settings are valid only for an explicitly created dial-up network connec-
tion to the Internet. The numbers for connections established via the network card
function for fast Internet access (NDIS interface for Internet access without dial-up
network) are entered in the PC Configurator.