Filter
Top Products
Chapter 3 Configuration 33
5. Select Enable Dynamic Routing (RIPv1)
6. Select the passive or active route setting.
7. Select the Process ARP requests if appropriate.
8. Click Apply.
9. Click Reboot for changes to take effect.
About Autoconnection
The autoconnection feature allows you to configure a user to access the
device server and then be automatically connected to a host on the LAN.
You can implement autoconnection in the following ways:
• By port, where all port users are automatically connected to the
same host. The device server is completely transparent to them.
• By user, where a user is required to log on and may be required to
supply a password. Once the user is authenticated, an automatic
connection to a host is made.
Configuring a Port for Autoconnection
1. Select Serial Ports under Configuration.
2. Click the TCP Sockets Port Profile.
Note: TCP Sockets is the Autoconnection profile.
3. Click Apply.
4. Select Automatically establish TCP connections and the appropriate
parameters. Use the Help button for addtional information.
5. Click Apply.
6. Click Reboot for changes to take effect.
Note: To return to the main Ports menu, choose Ports from the Menu again.