Digi MIL-3200X Printer User Manual


 
Chapter 2
MIL-3200X Series of FastPort Print Servers 2-5
I
N
S
T
A
L
L
A
T
I
O
N
Figure 2-2. MIL-3210X Rear Panel of FastPort
The unit performs POST (power-on self-test) at start-up and
tries to resolve its IP addresses.
If the IP address is set, the
SYS
LED blinks once per second.
If the IP address is not set, the
SYS
LED blinks five times
per second until the address is set either manually or by
using
RARP
,
BOOTP
, or
DHCP
.
FastPort should now be functioning on the network. Consult
the
FastPort User’s Guide
to continue the installation on a
specific client computer.
UTP
16VAC
PWR SYS NET LNK
MIL•4320M
CXPW
FT RX