Digi MIL-3200X Printer User Manual


 
Chapter 3
3-2 MIL-3200X Series of FastPort Print Servers
M
I
C
R
O
M
O
D
U
L
E
S
3.1 Introduction
Each version of the MIL-3200X has its own type of micro
module for its network connection:
MIL-3210X
: Has the MIL-4310M micro module on-board.
The MIL-4310M has an RJ-45 connector (Unshielded
twisted pair).
MIL-3220X
: Has the MIL-4320M micro module on-board.
The MIL-4320M has a BNC connector (thin COAX).
MIL-3230X
: Has the MIL-4330M micro module on-board.
The MIL-4330M has an ST connector (fiber optic).
Each micro module can be swapped so that the user can
change the network connection. However, always power
down the device before swapping a micro module. FastPort is
not capable of “hot-swappable” maneuvers.
3.2 Configuration
The micro modules come with five different type of
connectors: RJ-45, ST, SMA, AUI, and thin COAX (BNC). Refer
to the
MIL-4300M Series of Micro Modules Installation Guide
for
configuration and specification information.
3.3 Versions of the Micro Modules
Versions of MIL-4300M series of micro modules supported by
the MIL-3200X series, includes:
MIL-4310M: 10BASE-T, with an RJ-45 connector (versions
C, D and E)
MIL-4320M: 10BASE2, with a COAX (BNC) connector
(versions A and B)
MIL-4330M: 10BASE-FL multi-mode, with an ST connector
(versions A and B)