Digi MIL-3200X Printer User Manual


 
ii Doc: # 90000069 Rev. C
Legal
Trademark Rights
Digi International™, FastPort™, Print Server Software™, and the Digi logo are trademarks of
Digi International, Inc
. All other brand
and product names are the trademarks of their respective holders.
© Digi International, 1998. All Rights Reserved.
Information in this document is subject to change without notice and does not represent a commitment on the part of Digi
International.
Digi International provides this document “as is,” without warranty of any kind, either expressed or implied, including, but not
limited to, the implied warranty of fitness or merchantability for a particular purpose. Digi International may make improvements
and/or changes in this manual or in the product(s) and/or the program(s) described in this manual at any time.
This document could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein;
these changes may be incorporated in new editions of the publication.
Restricted Rights
For non-U.S. Government use
These programs are supplied under a license. They may be used, disclosed, and/or copied only as permitted under such license
agreement. Any copy must contain the above copyright notice and this restricted rights notice. Use, copying, and/or disclosure of the
programs is strictly prohibited unless otherwise provided in the license agreement.
For U.S. Government use
Use, duplication, or disclosure by the Government is subject to restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in
Technical Data and Computer Software clause of DFARS 52.227-7013.
The Digi Five-Year Limited Warranty
Digi International warrants to the original consumer or purchaser that each of its products, and all components thereof, will be free
from defects in material and/or workmanship for a period of five years from the original factory shipment date. Any warranty
hereunder is extended to the original consumer or purchaser and is not assignable.
Digi International makes no express or implied warranties including, but not limited to, any implied warranty of merchantability or
fitness for a particular purpose, except as expressly set forth in this warranty. In no event shall Digi International be liable for incidental
or consequential damages, costs, or expenses arising out of or in connection with the performance of the product delivered hereunder.
Digi International will in no case cover damages arising out of the product being used in a negligent fashion or manner.
Regulatory Approvals
FCC Class A
UL 1950
CSA 22 No. 950
EN60950
CE
– EN55022 Class B
– EN50082-1
Canadian EMI Notice
This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
European Notice
Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued
by the commission of the European Community. Compliance with these directives implies conformity to the following European
Norms:
EN55022 (CISPR 22) - Radio Frequency Interference
EN50082-1 (IEC801-2, IEC801-3, IEC801-4) - Electromagnetic Immunity
EN60950 (IEC950) - Product Safety
To Contact Digi
For prompt response when calling for service information, have the following information ready:
Product serial number
Date of purchase
Vendor or place of purchase
You can reach Digi LAN technical support at 408/744-2751 or
"sun-tech@dgii.com"