Filter
Top Products
Chapter 10 Configuring Autoconnection 51
Procedure for Configuring Inbound or Outbound Socket Communication
1. Access the web interface by entering the device server IP address in a
browser’s URL window.
2. Log on to the Digi One/PortServer TS as root. The default password is
dbps.
3. Click Serial Ports.
4. Click the port number you want to configure.
5. Click Change Profile and select UDP Socket
Note: The serial parameters for two connecting devices must match meaning if one
device is set for 9600 bps, the other device must be set for the same rate.
6. Fill in the requested information and click Apply to save the settings.
7. Repeat these steps until you have added the necessary destinations.
Use the context sensitive Help for additional information.