Filter
Top Products
203
Monitor and manage Digi devices
packet_timeout=0-255 {Packetization timeout, chars}
dio0_config=0-5 {AD0/DIO0 configuration}
dio1_config=0-5 {AD1/DIO1 configuration}
dio2_config=0-5 {AD2/DIO2 configuration}
dio3_config=0-5 {AD3/DIO3 configuration}
dio4_config=0-5 {DIO4 configuration}
dio5_config=0-5 {DIO5 configuration}
dio6_config=0-1 {DIO6 configuration}
dio7_config=0-7 {DIO7 configuration}
pwm0_config=0-5 {PWM0 configuration}
dio11_config=0-5 {DIO11 configuration}
dio12_config=0-5 {DIO12 configuration}
rssi_timer=0-255 {RSSI PWM timer, x 100 msec}
pullup_enable=0x0-0x1fff {Pull-up resistor enable, bitfield}
sleep_mode=0-5 {Sleep mode}
sleep_time=0-65535 {Time before sleep, msec}
sleep_count=0-65535 {Peripheral sleep count}
command_timeout=2-655 {Command mode timeout, x 100 msec}
guard_times=2-3300 {Guard times, msec}
command_char=char {Command sequence character}
Display Mesh network configuration settings: command syntax
To display the current configuration settings for a Mesh network device, use the set mesh
command. Command syntax is:
set mesh [addr=address]