Filter
Top Products
217
Administration tasks
Display system information
System information displays the model, MAC address, firmware version, boot version,
and POST version of the Digi device. It also displays memory available: total, used, and
free, and tracks CPU percent utilization and the uptime.
From the web interface menu, select Administration > System Information. Select
General, Serial or Network for the appropriate information. For descriptions of the
information displayed on these screens, see page 176.
Reboot the Digi device
Changes to some device settings require saving the changes and rebooting the Digi device.
To reboot a Digi device:
1 From the web interface menu, select Administration > Reboot.
2 On the Reboot page, click the Reboot button. Wait approximately 1 minute for the
reboot to complete.
Enable/disable access to network services
As needed, enable and disable access to various network services, such as ADDP,
RealPort, SNMP, and Telnet. For example, for performance and security reasons, it may
be desirable to disable access to all network services not necessary for running or
interfacing with the Digi device. In the web interface, enabling and disabling network
services is done on the Network Services settings page for a Digi device. See "Network
services settings" on page 82.