Filter
Top Products
276609-2221
Answer
Command that will answer the incoming call.
Default:ATA
Timeout
Define the time in seconds, For how long time the ED-20 will accept incoming calls from
power-up. Normally not used, leave as is.
Allowed values: 0-9999
Default: 0
8.2.3 Network Settings
Login
The login username and password is used on the dial-in connection and when the ED-20
is configured with ED-Tool for ED-20 over a network connection.
Authentication
Select if authentication shall be used over the PPP link or not.
Authentication can be used with either the PAP (Password Authentication Protocol) or
CHAP protocols (Challenge Handshake Authentication Protocol)
If a invalid Username or password is entered the ED-20 will disconnect the PPP link and
cause the modem to disconnect.
Allowed values: NONE, PAP, CHAP
Default: NONE
Username
Allowed string length: 1 – 19 characters.
Allowed characters:‘0’ to ‘9’,‘a’ to ‘z’ lower case.
Default: ed20
Password
Allowed string length: 1 – 19 characters.
Allowed characters:‘0’ to ‘9’,‘a’ to ‘z’ lower case.
Default: ed20