Filter
Top Products
© 2004 Directed Electronics, Inc
Troubleshooting
No Picture
Press the POWER and SOURCE buttons to make sure the monitor is on and the proper
input is selected. If there is still no picture press the PICTURE button. If the menu appears,
check the source unit and video connections. If NO MENU appears, check all fuses and
power connections to the model.
No Picture and Sound
Press the [ A/V ] button to make sure you are not in A/V output.
Picture Rolls
Check that the T.V. type setting is correct for the monitors and DVDs being used. PAL video
often rolls on NTSC monitors.
With a DVD player and a widescreen DVD disc, there are black bars
on the screen.
Change the TV display mode to “WIDE” in the DVD player’s setup menu. After changing this
setting, if there are still black bars, press the MODE button on the remote control.
With a widescreen 16:9 monitor, I have black bars on the screen?
Change the T.V. display mode to “Wide”.
Unit does not eject?
Make sure the model is powered “ON”
22