Filter
Top Products
Protocol ID : ESP
SPI Size : 4
SPI Value : 0xafba2d15
Transform 1/1
Transform ID : Rijndael (aes)
Key length : 128
Authentication algorithm : HMAC-MD5
SA life type : Seconds
SA life duration : 21600
SA life type : Kilobytes
SA life duration : 50000
Encapsulation mode : Tunnel
NONCE (Nonce)
Payload data length : 16 bytes
ID (Identification)
Payload data length : 8 bytes
ID : ipv4(any:0,[0..3]=10.4.2.6)
ID (Identification)
Payload data length : 12 bytes
ID : ipv4_subnet(any:0,[0..7]=10.4.0.0/16)
Step 9. Client Confirms Tunnel Setup
This last message is a message from the client saying that the tunnel is up and running. All
client/server exchanges have been successful.
IkeSnoop: Received IKE packet from 192.168.0.10:500 Exchange type :
Quick mode ISAKMP Version : 1.0
Flags : E (encryption)
Cookies : 0x6098238b67d97ea6 -> 0x5e347cb76e95a
Message ID : 0xaa71428f
Packet length : 48 bytes
# payloads : 1
Payloads:
HASH (Hash)
Payload data length : 16 bytes
9.4.6. IPsec Advanced Settings
The following NetDefendOS advanced settings are available for configuring IPsec tunnels.
IPsec Max Rules
This specifies the total number of IP rules that can be connected to IPsec tunnels. By default this is
initially approximately 4 times the licensed IPsecMaxTunnels and system memory for this is
allocated at startup. By reducing the number of rules, memory requirements can be reduced but
making this change is not recommended.
IPsec Max Rules will always be reset automatically to be approximately 4 times IPsec Max
Tunnels if the latter is changed. This linkage is broken once IPsec Max Rules is altered manually
so that subsequent changes to IPsec Max Tunnels will not cause an automatic change in IPsec Max
Rules.
Default: 4 times the license limit of IPsec Max Tunnels
IPsec Max Tunnels
9.4.6. IPsec Advanced Settings Chapter 9. VPN
421