Filter
Top Products
9
Group (Hub) Configuration
Clicking Fault → Group/Port Control → [Hub ID] will show the current configuration
information of the Hub.
The information is described as follows:
♦ Serial Number This is a unique hardware serial number of the Hub.
♦ Description This is the product ID.
♦ Slot 1/ Slot 2 Type These indicate the type of module, if present, in the back-slot
of the Hub.
♦ Repeater Type Product information of the Hub.
♦ Group Role The role of the Hub within the stack, either primary-master,
backup-master, or slave.
♦ Hardware Revision The version of the repeater hardware board used in this
Hub.
♦ Status Tells whether the Hub is up or down.
♦ Last Operation Status Change Time of the last status change for the Hub. A
status change occurs when the Hub goes online or off-line.