Filter
Top Products
Dual-Speed Stackable Hub Web-based Management User’s Guide
16
♦ Action The action to be taken in event of intrusion on the port: send trap,
partition, send trap & partition, or no action.
♦ Auto Learn Can set auto-learning to enable or disable.
♦ Delete Click this to delete and disable a port/ intrusion entry.
Back-Up Port
A Back-Up Port is a link pair consisting of a master port and a back-up port. The
back-up port is immediately enabled should the master port fail. If the master port
returns (from failure), back-up link traffic is switched back to the master link. A
maximum limit of 3 back-up’s are allowed per Hub.
Eavesdrop information is described as follows:
♦ Hub ID Select a Hub from the hub stack.
♦ Master/ Back-Up Port Enter the port ID numbers to create a back-up pair.
♦ Active Displays None, if both ports are inactive; Master, if master port is active;
and Back-Up, if back-up port is active.
♦ Status Select Valid to enable the pair, else Invalid to disable the pair.