Filter
Top Products
Dual-Speed Stackable Hub Web-based Management User’s Guide
10
♦ Isolated/ Reconnected Group This is an option to isolate or reconnect the Hub
in the hub stack.
Port Configuration
Clicking Fault→Group/Port Control→[Port ID] will show the current configuration
information of the port.
The information is described as follows:
♦ Port Type The type is UTP, BNC, or AUI.
♦ Link Status Indicates link status: link up or link down.
♦ Auto Partition Status Indicates whether the port has been auto-partitioned or
not.
♦ Speed Indicates the port speed: 100Mbps or 10Mbps.
♦ Polarity Status Indicates the polarity status: normal or reversed.