Filter
Top Products
5
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 2 – Connect the Device to your Computer
Connect the Ethernet cable from the computer to one of the LAN ports
(numbered 1 to 4) on the DSL-2740. Wait for the LAN Link LED for the
corresponding LAN port number to flash, before proceeding onto the next step.
Follow the
on-screen
instructions,
then Click
Next to
continue