Filter
Top Products
7
CONNECTING THE DVR TO THE ROUTER AND ASSIGNING THE IP ADDRESS
-----------------------------------------------------------------------------------------
The first step in the whole process is to setup the DVR and the cameras. Consult your DVR manual for
setup details as explained at the beginning of this document.
Once the DVR is powered up and the cameras are setup, you should then connect the DVR to the router
using a standard RJ-45 ETHERNET cable. Once you connect the DVR to the router, you need to enter
the menu of the DVR by following the exact steps below:
1) On the Samsung™ DVR’s, you push the MENU button – located on the upper right side of the DVR
front panel.
2) After you push the MENU button, the password menu screen comes up as shown below. Enter the
password (default is 4321) and press the ENTER key (round button in the middle of the cursor buttons)