Filter
Top Products
32
Using the Configuration Menu (continued)
Advanced > Performance > 802.11a (Continued)
Super A Mode-
Super A is a group of performance enhancement features that
increase end user application throughput in an 802.11a network.
Super A is backwarsd compatible to standard 802.11a devices.
For top performance, all wirelss devices on the network should
be super A capable. Select either Disabled, Super A without Turbo,
Super A with Dynamic Turbo, or Super A with Static Turbo.
Disabled-
Standard 802.11a support, no enhanced capabilities.
Super A without
Turbo-
Capable of Packet Bursting, FastFrames, Compression, and no
Turbo mode.
Super A with
Dynamic Turbo-
Capable of Packet Bursting, FastFrames, Compression, and
Dynamic Turbo. This setting is backwards compatible with non-
Turbo (legacy) devices. Dynamic Turbo mode is only enabled
when all nodes on the wireless network is Super A with Dynamic
Turbo enabled.
Super A with
Static Turbo-
Capable of Packet Bursting, FastFrames, Compression, and
Static Turbo. This setting is not backwards compatible with non-
Turbo (legacy) devices. Static turbo mode is always on and is
only enabled when all nodes on the wireless network is Super A
with Static Turbo enabled.
Advanced > Performance > 802.11g
Wireless
Performance-
Select 802.11a or 802.11g.
802.11g is selected here. Dis-
played in this window are the
Wireless Performance fea-
tures for the Access Point por-
tion of the DI-784.
TX Rates-
Auto is the default selec-
tion. Select from the drop
down menu for your selec-
tion.
Full is the default selection. Select from the drop down menu for
your selection.
Transmit Power-
Beacon interval-
Beacons are packets sent by the DI-784 to synchronize a wire-
less network. Specify a value. 100 is the default setting and is
recommended.