Filter
Top Products
34
Using the Configuration Menu (continued)
Administrator
Login Name-
admin (lower case) is the default login
name for the admin account. The admin
account has read/write access to the
router.
User
Login Name-
user (lower case) is the default login name
for the user account. The user account has
read-only access to the router.
Admin Password-
The default setting is blank - no password. To change the pass-
word, enter and confirm the new password.
User Password-
The default setting is blank - no password. To change the pass-
word, enter and confirm the new password.
CTS Mode-
CTS (Clear To Send) is a function used to minimize collisions
among wireless devices on a wireless local area network (LAN).
CTS will make sure the wireless network is clear before a wire-
less client attempts to send wireless data. Enabling CTS will
add overhead and may lower wireless throughput.
Auto-
CTS will monitor the wireless network and automati-
cally decide whether to implement CTS based on
the amount of traffic and collisions that occurs on
the wireless network.
Always-
CTS will always be used to make sure the wireless
LAN is clear before sending data.
None- CTS is typically used in a pure 802.11g environment.
If CTS is set to “None” in a mixed mode environment
populated by 802.11b clients, wireless collisions may
occur frequently.
Advanced > Performance > 802.11g (continued)
Tools> Admin
802.11g only mode-
Select this mode to restrict your network to only those devices
that employ the 802.11g standard. Enabling this mode will en-
sure that you maintain the highest connectivity rate, unhampered
by any connection to an 802.11b device.