Filter
Top Products
10/100 Fast Ethernet Switch User’s Guide
Unpacking and Setup
7
Setup
The setup of the Switch can be performed using the following steps:
♦ The surface must support at least 1.2 Kg for the DES-1004 and 2.5
KG for the DES-1008.
♦ The power outlet should be within 1.82 meters (6 feet) of the device.
♦ Visually inspect the power cord and see that it is fully secured to the
AC power connector.
♦ Make sure that there is proper heat dissipation from and adequate
ventilation around the Switch. Do not place heavy objects on the
Switch.
Desktop or Shelf Installation
When installing the Switch on a desktop or shelf, the rubber feet included
with the device must be first attached. Attach these cushioning feet on the
bottom at each corner of the device. Allow enough ventilation space
between the device and the objects around it.