D-Link DES-3216 Switch User Manual


 
10/100 Auto Negotiation Switch User’s Guide
Introduction
2
1
Introduction
This chapter gives a physical and functional overview of the DES-3216. The DES-3216 is an
intelligent, managed switch, designed for use on medium sized networks as part of the
backbone or for use with other switches and hubs on a larger network.
The chapter is divided into the following sections. Each section briefly describes the features
of the DES-3216. Most of the topics discussed will be explained in greater detail later in the
manual.
The topics covered are:
Summary of Features
Panels of the DES-3216
Management Methods
Updating Firmware
Features
The DES-3216 has the following features:
All 16 ports auto-negotiate 10/100 Mbps.
The DES-3216 can be configured and customized to your network.
The DES-3216 can be managed in three ways: Local Console Management, Telnet
and SNMP.
Supports Cut-through and Store-and-Forward switching.
Supports Full and Half Duplex for both 10 Mbps and 100 Mbps. .
Wire-speed packet filtering and forwarding for up to 16 ports.
Eight thousand active MAC address table entries per device with self-learning and
table aging.
The DES-3216 supports SNMP for RFC 1213, RFC 1757, and RFC 1493.
VLAN support for eight broadcast domains.
Port Trunking support for bandwidth aggregation between two DES-3216 switches.