Filter
Top Products
20
MAC Address:
The default MAC address is set to the WAN’s physical interface MAC address on the
Broadband Router. You can use the “Clone MAC Address” button to copy the MAC
address of the Ethernet Card installed by your ISP and replace the WAN MAC
address with this MAC address. It is not recommended that you change the default
MAC address unless required by your ISP.
Primary/Secondary DNS Address:
Enter a DNS Address if you do not wish to use the one provided by your ISP.
MTU:
Only enter the MTU if it is required by your ISP. Otherwise, leave it
at the default setting of 1500.
Auto-reconnect:
If enabled, the Broadband Router will automatically connect to your ISP after your
system is restarted or if the connection is dropped.
Using the Configuration Menu (continued)
Home > WAN (continued)