Filter
Top Products
53
Using the Configuration Menu (continued)
Status > Device Info
This page in the Configuration Utility displays the current information for the Broadband
Router. It will display the WAN, LAN, and MAC address information. If your WAN
connection is set up for Dynamic IP address a Release button and Renew button
will be displayed. Use Release to disconnect from your ISP and use Renew to connect
to your ISP. If your WAN connection is set up for PPPoE, a Connect button and
Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection
and use Connect to establish the PPPoE connection. This page allows you to observe
the DI-704UP’s working status: