Filter
Top Products
DSL-504T DSL Router User’s Guide
42
Static Routing
Use Static Routing to specify a route used for data traffic within your Ethernet LAN or to route data
on the WAN. This is used to specify that all packets destined for a particular network or subnet use
a predetermined gateway.
Static Routing menu
To add a static route to a specific destination IP on the local network, enter a Destination IP
address, Netmask, then click the Gateway radio button and type in the Gateway’s IP address.
Click Apply to enter the new static route in the table below. The route becomes active immediately
upon creation.
To add a static route to a specific destination IP on the WAN, click the Connection radio button and
choose a connection from the pull-down menu, then enter a Destination IP address and Netmask.
Click Apply to enter the new static route in the table below. The route becomes active immediately
upon creation
To remove a static route from the table in the bottom half of the window, choose to Delete it from
the table and click the Apply button. Remember to save the configuration changes.