Filter
Top Products
29D-Link DAP-1522 User Manual
Section 3 - Conguration
Enable DHCP
Server:
DHCP IP Address
Range:
Default Subnet
Mask:
Default
Gateway:
Default Wins:
Default DNS:
DHCP Lease
Time:
DHCP Client List:
Check to enable the DHCP Server on the access
point.
Enter the IP address range to assign to the clients
on your network.
Enter the subnet mask.
Enter the default gateway IP address.
Enter the WINS server IP address.
Enter the DNS server IP address.
Note: If you statically (manually) assign IP addresses
to your computers or devices, make sure the IP
addresses are outside of this range or you may
have an IP conict.
Enter the DHCP lease time (in minutes).
Clients on your network that are assigned IP
addresses will be displayed here.
DHCP Server
DHCP stands for Dynamic Host Control Protocol. The DAP-1522 has a built-in DHCP server. The DHCP Server will automatically
assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting
their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load
the proper TCP/IP settings provided by the DAP-1522. The DHCP Server will automatically allocate an unused IP address from
the IP address pool to the requesting computer.