Filter
Top Products
61D-Link DAP-1522 User Manual
Section 3 - Conguration
Device Name:
LAN
Connection
Type:
IPv4 Address:
Subnet Mask:
Default
Gateway:
Primary DNS
Server:
Secondary
DNS
Server:
My IPv6
Connection:
Enter the Device Name of the AP and click Next to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
Use the drop-down menu to select Static IP if your ISP
assigned you the IP address, subnet mask, gateway,
and DNS server addresses. Select DynamicIP(DHCP)
to automatically assign an IP address to the computers
on the LAN/private network.
Enter the IPv4 address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Enter the primary DNS server IP address.
Enter the secondary DNS server IP address.
Select the mode you would like the router to use to
connect to the IPv6 Internet from the drop-down menu.
This section will allow you to change the local network settings of the bridge and to congure the Static settings.
LAN Settings
Static