Filter
Top Products
DE-220P Series Ethernet Adapter
/
User’s Guide
---------------------------~~~~~~~
run the diagnostic routines of setup. exe program
to
test the configuration.
Single-Adapter Installation
1.
2.
3.
4.
5.
Shut down the computer, unplug its power cord,
and remove
the
chassis cover.
Insert the DE-220P Series card into the connector
of any open ISA expansion slot. You may choose
either an 8-bit or l6-bit, expansion slot,. A l6-bit,
slot, will provide better network performance. As-
certain that,
the
card is fully
seated
in the
expansion slot
connector.
Install the bracket, screw which secures the card
to
the
computer chassis.
Replace
the
cornputer’s
chassis cover.
For non-PnP
systems,
configure
the
DE-220P Se-
ries adapter by running the supplied setup
program, setup. exe. (For PnP-compliant sys-
tems, this step is fully
automated
and requires no
action.)
2-8
Installation