Filter
Top Products
DE-220P Series Ethernet Adapter
/
User’s Guide
---------_-------__---------------
2. The cable will have an RJ-45 plug on each
end. Plug one end into
the
RJ-45 receptacle of
the
DE-220P Series adapter, and plug the
other end
into
an available port, of a lOBase-T
hub. Push each
RJ-45
plug into its receptacle
until its retainer snaps into place.
The Network Medium is Thin
Coaxial Cable
1. Connect, a BNC T-connector onto the BNC recep-
tacle of the DE-220P Series card.
2. Connect,
the
network feed cable onto either open
end of the BNC T-connector.
3a.
If the cable continues on
to
an additional station
or stations, then connect. the continuation cable
onto the remaining open end of the BNC
T-
connector.
3b. If the
network
cable does not, continue to addi-
tional stations (your computer is at, the end of the
cable), then connect, a
50-ohm
terminator
to
the
remaining open end of the BNC
T-conector.
2-14
/nsta//ation