Filter
Top Products
-----
DE-22OP
Series Ethernet Adapter
/
User’s Guide
-----------------------------
Multiple-Adapter Installation
Multiple DE-220P Series cards may be installed in
a computer to provide for multiple addresses, or in
the case of a server,
to
provide for network seg-
mentation.
Multiple Cards in a
PnP
System
No special attention is needed when installing
multiple DE-220P Series cards in a PnP-compliant
system (so long as Plug and Play is enabled). In-
stall the several cards into their expansion slots,
following the four steps set, out in the “Single-
Adapter Installation” section above (repeating
steps 2 and 3 for each card). When computer
power is
switched
on, the PnP system will auto-
matically
select
coordinated (conflict,-free)
configuration settings for the several cards.
3
Plug and Play functionality of the NOS may be toggled between
enable and disable by a selection in your setup.exe run.
Installation
2-9