Filter
Top Products
5 Configuration D-Link Web Smart Switch User Manual
Figure 70 – Configuration > Link Aggregation > Port Trunking
Auto Surveillance VLAN State: Select to enable or disable Auto Surveillance. The default is Enabled.
VLAN ID: By default, the VLAN ID 1 was created as Surveillance VLAN and all ports are member ports. You
also can create another Surveillance VLAN by selecting a VLAN ID that you have created a VLAN from the
802.1Q VLAN page. The member port you configured in 802.1Q VLAN setting page will be the static
member port of surveillance VLAN. To dynamically add ports into the surveillance VLAN, please enable the
Auto Detection function.
Priority: The 802.1p priority levels of the traffic in the surveillance VLAN.
Aging Time: Enter a period of time in hours to remove an automatic member port from surveillance VLAN.
When the last IP camera stops sending traffic and its MAC address is aged out, the aging timer will be
started. The port will be removed from the surveillance VLAN after expiration of the aging timer. Selectable
range is from 1 to 120 hours and default is 1 hour.
From Port / To Port: A consecutive group of ports may be configured starting with the selected port.
Auto Detection: Switch will add ports to the surveillance VLAN automatically if it detects the device OUI
matches the Telephony OUI configured in Auto Surveillance VLAN OUI Setting page. Use the drop-down
menu to enable or disable the OUI auto detection function. The default is Disabled
Click Apply to implement changes made.
Configuration > Auto Surveillance VLAN > Auto Surveillance VLAN OUI Setting
This window allows the user to configure the user-defined surveillance traffic’s OUI. An Organizationally
Unique Identifier (OUI) is the first three bytes of the MAC address. This identifier uniquely identifies a vendor,
manufacturer, or other organization.
Figure 71 – Configuration > Link Aggregation > Port Trunking
User defined OUI: You can manually create an OUI with a description. The maximum number of user
defined OUIs is 5. System will auto generate an ACL profile (Profile ID: 56) for all the surveillance VLAN
rules.
Click Add to create a new user defined OUI and delete to remove an existing entry.
40