Filter
Top Products
19
Add Item:
To add a device to the Monitor List manually , enter the IP
Address of the device that you want to monitor.
Delete Item:
To delete the device in the Monitor List.
Device Setting
You can set the device by using the function key in the Device Setting
Dialog box.
Configuration Setting:
In this Configuration Setting, you can set the
IP Address, Subnet Mask, Gateway, Set Trap to (Trap IP Address),
System name and Location.
Select the device in the Discovery list or Monitor List and press this
button, then the Configuration Setting window will pop out as Figure
10, after filling up the data that you want to change, you must fill up
the password and press the “Set” to process the data changed
immediately.
Figure 10. Configuration Setting