Filter
Top Products
32
Abnormal* Transmit Erro
r: a trap when there are transmit data
error in copper port.
Abnormal*: 50 error packet count within 10 seconds.
Set Password
Password is the invaluable tool for the manager to secure Web
Management Switch, use this function to change the password.
If you forget the password, press the “Reset” button in the rear panel
of the Switch, the current setting includes VLAN, Port Setting… etc.
will be lost and the Switch will restore to the default setting.
Figure 27. Set Password
Backup Setting
The backup tools help you to backup the current setting of the Switch.
Once you need to backup the setting, press the
“Backup”
button to
save the setting.
To restore a current setting file to the device, you must specify the
backup file and press
“Restore”
button to proceed the setting of the
recorded file.