Filter
Top Products
26
To change the port setting, click on the ID parameter to enter to the
selected port to configure its Speed/Disable, Flow control and QoS
setting.
Figure 18
Speed/Disable:
This setting has six modes—
100M Full
,
100M Half
,
10M Full
,
10M
Half, Auto and Disable
— for speed or port disable selections.
Flow Control:
This setting determines whether or not the Switch will be handling
flow control. Set
FlowCtrl
to
Enable
for avoiding data transfer
overflow. Or it sets to
Disable
; there is either no flow control or other
hardware/software management.
When the port is set to
forced mode
, then the flow control will
automatically set to
Disable.