Filter
Top Products
4 D-Link Systems, Inc.
DSM-G600 Install GuideHardware Overview
Rear Panel
Reset Button
Pressing the reset button for 10 seconds with
a paper clip will restore the unit to the original
factory default settings. The button is inside the
hole to prevent an accidental reset.
USB 2.0 Ports
Use these ports to connect USB 2.0 drives.
USB 1.1 drives may also be connected but
will be limited to USB 1.1 speed.
Power Receptor
Receptor for the supplied
power adapter.
LAN Port
Connects to your Ethernet network. The LAN port
supports Auto MDI/MDI-X, allowing you to connect a
straight-through or crossover cable.
Dismount Button
Press to safely remove USB
drives from the DSM-G600.
Dismount Button
P
ress to safely remove
USB
drives f
rom the DSM-G600.
Fan/Vent
Fan to cool the internal
hard drive.
Fan/Vent
Fan to cool the internal
Fan to cool the internal
hard drive.
Antenna
Connects to a
wireless network.