Filter
Top Products
D-Link Systems, Inc. 7
DSM-G600 Install Guide Installing the Hardware
Installing the Hardware (continued)
D. Use the mounting screw to
secure the hard drive to
the DSM-G600.
E. Replace the cover and
screw the two screws
on the back panel of the
DSM-G600.
F. Connect an Ethernet
cable to the Ethernet port
located on the back of the
DSM-G600.
Note: It is required that an Ethernet cable is used during initial setup. Once
your wireless confi guration is set, you may disconnect the Ethernet cable and
begin communicating wirelessly with your DSM-G600.