![](http://pdfasset.owneriq.net/5/0a/50a79422-84d6-462a-b95d-c3aa5531029d/50a79422-84d6-462a-b95d-c3aa5531029d-bg6.png)
6 D-Link Systems, Inc.
DSM-G600 Install GuideInstalling the Hardware
Installing the Hardware
A. Unscrew the two screws
on the back panel of the
DSM-G600 to remove
the cover.
B. Connect the IDE cable to
the IDE cable connector
on your hard drive.
Note: Make sure the
jumper setting on your
hard drive is set to
Master or Cable Select.
C. Connect the power cable
to the power connector
on your hard drive.