Filter
Top Products
41D-Link DWA-556 User Manual
Section 4 - Wireless Security
CongureWPA
™
/WPA2
™
Passphrase
UsingtheD-LinkWirelessConnectionManager
It is recommended to enable WPA-PSK on your wireless router or access
point before configuring your wireless adapter. If you are joining an
existing network, you will need to know the WPA-PSK passphrase being
used.
1. Open the Wireless Connection Manager by double-clicking on the
D-Link icon on your desktop.
2.Highlight the wireless network (SSID) you would like to connect to
and click Connect. If the network is using WPA-PSK, the screen (as
shown to the right) will appear.
3. Enter the WPA-PSK passphrase exactly as it is on your wireless router
or access point. Click the Showtextinthepasswordeld box to see
the passphrase. Unchecking it will hide it.
4. Click OK to connect to the network. Allow up to 30 seconds to
connect.
If you would like to create a new network and enter the WEP settings,
refer to the next page.