D-Link DWL-2000AP Network Card User Manual


 
16
Using the Configuration Menu (continued)
Home > LAN
LAN is short for Local Area Network. This is considered your internal network. These
are the IP settings of the LAN interface for the DWL-2000AP. These settings may be
referred to as Private settings. You may change the LAN IP address if needed. The LAN
IP address is private to your internal network and cannot be seen on the Internet.
Apply-
Click Apply to save the changes.
Gateway-
This field is optional. Enter in the lP address of the router on
your network.
Subnet Mask-
The subnet mask of the LAN interface.
The default subnet mask is 255.255.255.0
IP Address-
The IP address of the LAN interface. The default IP address
is: 192.168.0.50