Filter
Top Products
46
8. Resetting the DWL-2000AP to Factory Default Settings
After you have tried other methods for troubleshooting your network, you
may choose to Reset the DWL-2000AP to the factory default settings.
To hard-reset the D-Link DWL-2000AP to the Factory Default Settings, please
do the following:
Troubleshooting (continued)
After the DWL-2000AP reboots (this may take a
few minutes) it will be reset to the factory Default
settings
Use a paper clip to press the Reset button
Hold for about 5 seconds and then release
Locate the Reset button on the back of the DWL-2000AP
Reset