D-Link Wireless AC1750 Network Router User Manual


 
142D-Link DIR-868L User Manual
Appendix B - Networking Basics
Networking Basics
Check your IP address
Windows® XP Users
Click on Start > Run. In the run box type cmd and click OK.
At the prompt, type ipcong and press Enter.
This will display the IP address, subnet mask, and the default gateway of your adapter.
Windows® 7/Vista® Users
• Click Start, type cmd in the search box and then click OK.
At the prompt, type ipcong and press Enter.
This will display the IP address, subnet mask, and default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some rewall software programs may
block a DHCP request on newly installed adapters.
Windows® 8 Users
Press the Windows key and R together. Type cmd in the box and click OK.
At the prompt, type ipcong and press Enter.
This will display the IP address, subnet mask, and default gateway of your adapter.
After you install your new D-Link wireless adapter and have established a wireless connection, by default, the TCP/IP settings should be set to obtain
an IP address from a DHCP server (i.e., router) automatically. To verify your IP address, please follow the steps below.