Filter
Top Products
24
Operating
● Some functions cannot be performed when a certain input port is selected, or
when a certain input signal is displayed.
● When you want to reset the operation, press the RESET button on the remote
control during the operation. Note that items whose functions are performed
simultaneously with operation (ex. LANGUAGE, H PHASE, VOLUME etc.)
cannot be reset.
● In the Advanced MENU, when you want to return to the previous display,
press the ◄ cursor button on the projector or remote control, or the ESC
button on the remote control.
5.
Press the MENU button on the remote control again to close the menu
and complete this operation. Even if you do not do anything, the dialog will
automatically disappear after about 10 seconds.
2.
Use the ▲/▼ cursor buttons to select a menu.
If you want to change it to the EASY MENU, select the EASY MENU.
Then press the ► cursor button on the projector or remote control, or the
ENTER button on the remote control to select an item. The display of the
selected menu will be active.
In the Advanced MENU
3.
Use the ▲/▼ cursor buttons to select an item to operate.
Then press the ► cursor button on the projector or remote control, or the
ENTER button on the remote control to progress. The operation menu of the
selected item will appear.
4.
Use the ▲/▼ cursor buttons to operate the item.
Using the menu function (continued)