Filter
Top Products
46
OPTION menu
OPTION menu (continued)
Item Description
MY BUTTON
This item is to assign one of the following function to
MY BUTTON
1 and 2 on the remote control (
6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button rst. Then
using the ▲/▼ buttons sets one of the following functions to the chosen button.
• RGB1: Sets port to RGB1.
• RGB2: Sets port to
RGB2.
• HDMI: Sets port to
HDMI.
• COMPONENT: Sets port to
COMPONENT (Y, C
B
/P
B
, C
R
/P
R
).
• S-VIDEO: Sets port to
S-VIDEO.
• VIDEO: Sets port to
VIDEO.
• INFORMATION: Displays the INPUT -INFORMATION- (
48) or
NETWORK -INFORMATION- (
61) or nothing.
• AUTO KEYSTONE
: Performs automatic keystone distortion
correction (
36).
• MY MEMORY
:
Loads one of adjustment data stored (
29)
.
When more than one data are saved, the adjustment changes every time
the
MY BUTTON is pushed.
When no data is saved in memory,
the dialog "No saved data" appears.
When the current adjustment is not saved to
memory, the dialog as shown in the right appears.
If you want to keep the current adjustment, please press the ◄ button to
quit. Otherwise loading a data will overwrite the current adjusted condition.
• ACTIVE IRIS: Changes the active iris mode.
• PICTURE MODE: Changes the PICTURE MODE (
25).
•
FILTER RESET: Displays the lter time reset conrmation dialogue (
45).
• AV MUTE : Turns the picture and audio on/off.
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item
(
43) appear or disappear.
• MY IMAGE: Displays the MY IMAGE menu (
60).
MY SOURCE
This item is to assign an input signals to
MY SOURCE /
DOC. CAMERA button on the remote control (
6, 18).
Using the ▲/▼ buttons sets one of the following input
signal.
RGB1
ó
RGB2
ó
HDMI
VIDEO
ó
S-VIDEO
ó
COMPONENT
SERVICE
Selecting this item displays the SERVICE menu.
Select an item using the ▲/▼ buttons, and press the ► button or
the
ENTER button on the remote control to execute the item.
FANSPEED
ó
AUTO ADJUST
ó
GHOST
ó
FILTER MESSAGE
ó
LENS TYPE
FACTORY RESET
ó
INFORMATION
ó
REMOTE FREQ.
ó
REMOTE RECEIV.
ó
KEY LOCK
FANSPEED
Using the ▲/▼ buttons switches the rotation speed
of the cooling fans. The HIGH is the mode for use at
highlands etc. Note that the projector is noisier when
the HIGH is selected.
HIGH
ó
NORMAL
(continued on next page)