Filter
Top Products
25
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons on the
projector or remote control. Then perform it according to
the following table.
Item Description
ASPECT
Using the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE
menu
(
30).
AUTO
KEYSTONE
EXECUTE
Using the ► button executes the auto keystone function.
See the AUTO KEYSTONE EXECUTE item in SETUP menu
(
36).
KEYSTONE
Using the ◄/► buttons corrects the vertical keystone distortion.
See the KEYSTONE
item in SETUP menu
(
36).
KEYSTONE
Using the ◄/► buttons corrects the horizontal keystone distortion.
See the KEYSTONE
item in SETUP menu
(
37).
PICTURE MODE
Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR
TEMP settings. Choose a suitable mode according to the projected
source.
NORMAL
ó
CINEMA
ó
DYNAMIC
ó
BOARD(BLACK)
DAYTIME
ó
WHITEBOARD
ó
BOARD(GREEN)
COLOR TEMP GAMMA
NORMAL #2 MID #1 DEFAULT
CINEMA #3 LOW #2 DEFAULT
DYNAMIC #1 HIGH #3 DEFAULT
BOARD(BLACK) #4 Hi-BRIGHT-1 #4 DEFAULT
BOARD(GREEN) #5 Hi-BRIGHT-2 #4 DEFAULT
WHITEBOARD #2 MID #5 DEFAULT
DAYTIME #6 Hi-BRIGHT-3 #6 DEFAULT
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and
COLOR TEMP (
27, 28) items in PICTURE menu.
•
When this function is performed, a certain extra such as a line may appear.
(continued on next page)