Filter
Top Products
13
Troubleshooting
Review the following possible solutions if you encounter a problem while using your printer.
If you still need assistance, contact DYMO Customer Support for your country. A list of contact numbers for each country
is included on the inside back cover of this manual.
Documentation Feedback
We are constantly working to produce the highest quality documentation for our products. We welcome your feedback.
Send us your comments or suggestions about our documentation. Please include the following information with your
feedback:
• Product name, version number, and page number
• Brief description of content (instructions that are inaccurate or unclear, areas where more detail is needed, and so on)
We also welcome your suggestions about additional topics you would like to see covered in the documentation.
Send email messages to: documentation@dymo.com
Please keep in mind that this email address is only for documentation feedback. If you have a technical question, please
contact Customer Support.
Error Message/Problem Solution
No display • Ensure the printer is turned on.
• Replace discharged batteries.
Poor Print Quality • Replace discharged batteries.
• Ensure tape cassette is installed properly.
• Clean the print head.
• Replace the tape cassette.
Poor Cutter Performance Clean the cutter blade. See Cleaning Your Printer.
L= n.nn” (or nnnn.n mm)
Fixed length setting is too small for text.
• Set the fixed length to a size longer than the text, or
• Decrease the amount of text.
Text Too Long
Exceeded maximum number of characters in buffer.
Delete some or all of the buffer text.
Too many lines
Exceeded maximum number of lines allowed.
Select another format.
Print Error
Undetermined printer error.
Check for label jam, empty label cassette, discharged
batteries, or other problems.
Tape Too Small
Tape size is too small for label content entered.
• Insert a larger size label cassette, or
• Decrease the size of the label content.
No Tape
Label cassette missing or empty.
Insert a new label cassette.
Battery low
Batteries almost discharged.
Replace batteries or connect AC power adapter.
Tape Jam
Motor is stalled due to label jam.
• Remove jammed tape and replace label cassette.
• Clean cutter blade.