Filter
Top Products
Indicator lights
There are four green indicats on the front panel of the router. All lights will come
on indicating self-test in progress every time the router is switched on.
Indicator Function Description
PWR Power Off - No power.
On - Power is on.
DIAG Diagnosis Off - Self-test OK.
Blinking – Upgrade in progress.
On - Self-test or upgrade failed.
LAN Network Link Off - Ethernet not present.
Blinking – Data going through Ethernet port.
On - Ethernet is present.
DSL Link Status Off - Handshaking/training in progress.
Blinking - Data going through ADSL port.
On - ADSL link is up.
4
Reconfigure router after reset to factory default
If it happens that the router has been reset to factory default, you must restore
the New Zealand configuration to connect. Go to Configuration > WAN > ATM
PVC > Setup ATM PVC:
5