Filter
Top Products
6
DX-PS12CC
4 Using the handle on the shredder head, lift and gently place the shredder head onto the rim of
the shredder body. Make certain the clips on the edge of the body are lined up with the
openings underneath the shredder head. The curved flap-like shape located on the back of the
shredder head should also align and fit properly as shown.
5 When aligned, gently push down on the shredder head until it sits flush on the shredder body.
(There should be no space between the shredder head and the shredder body.)
Push
down
Push
down
Correct fit
Incorrect fit
DX-PS12CC_13-0085 MAN_V2.fm Page 6 Tuesday, January 29, 2013 9:25 PM