12-sheet Crosscut Paper Shredder
9
Caution:
• Never feed more than one credit card or CD/DVD at a time.
• Only shred credit cards by feeding them vertically into the middle of the entry,
releasing when shredding begins. Never feed more than one credit card at a time.
• Do not activate the reverse function while shredding credit cards or CDs/DVDs.
• Hold the CD/DVD by the edge and feed one at a time, releasing when shredding begins. The
shredder will stop when the entire disc has been destroyed.
Caution:
• Never shred large paper clips, window or insulated envelopes, continuous forms,
newsprint, transparencies, laminated documents, cardboard, any items with
adhesives, hard materials, or plastic (except Credit Cards and CDs/DVDs).
• This shredder will shred staples and small paperclips. It is recommended that you
remove paper clips whenever possible to extend the lifespan of your shredder.
Maintaining
Caution: Failure to properly maintain your shredder will void the warranty.
• Crosscut shredders require regular oil lubrication for optimal performance and extended
lifespan. We recommend you oil your shredder once a month. To lubricate your shredder,
drizzle some basic vegetable or cooking oil (nothing flammable or petroleum based) onto a
few sheets of paper and feed it into the shredder.
• Do not spray or keep any aerosol products in or around shredder.
• DO NOT USE CANNED AIR ON THE SHREDDER.
• Be sure to periodically empty the wastebasket to avoid overloading and damaging the cutting
mechanism.
To clean the shredder:
• ALWAYS UNPLUG THE SHREDDER BEFORE CLEANING!
• Only clean the shredder by carefully wiping the unit with a dry soft cloth or towel.
• Do not clean or immerse the shredder in water. Having the unit wet may result in damage or
malfunction to the electrical components. If the shredder happens to get wet, be sure to
completely dry the unit immediately with a cloth or towel.
• Never use anything flammable to clean the shredder. This may result in serious injury or
damage to the product.
DX-PS12CC_13-0085 MAN_V2.fm Page 9 Tuesday, January 29, 2013 9:25 PM