Filter
Top Products
Page 4
10/30/2001
Manual Part Number 900-00027-001
10. Click “OK” again at the main network screen.
11. If asked to re-boot your computer, do so at this time
Figure 1.2.3 Example of TCP/IP Properties Dialog on Your PC
1.2.4 Configuring TransEagle
®
and Making a Connection
Once you have run the Leader Installation CD, you will notice that an icon for
TransEagle
®
will have been added to your desktop (also to the start menu).
Double-click on the TransEagle
®
icon to launch the program. You should
immediately be given a dialog asking if you would like to re-establish your
network connection. Since this is the first time you will be attempting to make a
connection to your Eagle, select NO. The TransEagle
®
program is shown in
figure 1.2.4.
Figure 1.2.4 TransEagle
®
Program
Note that the state of the Network->Enabled radio button on your screen will
currently be disabled since you have not yet made a connection. Click the
“Properties” button under Network. You will see the dialog shown in figure
1.2.5.