Filter
Top Products
Network Management Card
– User Manual 34003991EN/EB Page 28/118
4.2.1.3 Viewing the modules
◗ Click on "UPS Modules" scroll list to view the information about the UPS modules.
◗ Active sources:
x UPS + y UPS redundant : x indicates the minimal number of UPS necessary to power the load,
y indicates the number of UPS in redundancy.
The addition of these 2 values is the total number of available UPS.
◗ The "Minimum redundant UPS modules to trigger alarm can be configured from this page. The button Save makes
the card setting the parameter into the UPS. A warning message informs the user about the consequences of this
parameters modification.
The redundancy lost can generate Email notification (if set in the email notification page) and SNMP trap. It can
also be used by NSM for server protection criteria.
◗ The Module Nr gives the location of the module in the UPS.